How do you hold a microscope and why?
Always keep your microscope covered when not in use. Always carry a microscope with both hands. Grasp the arm with one hand and place the other hand under the base for support.
What do you hold when carrying the microscope?
To carry the microscope, grasp the microscope's arm with one hand. Place your other hand under the base. 2. Place the microscope on a table with the arm toward you.
How do you hold a microscope slide?
Slides should be held by the edges, avoiding the cover glass area. Always begin viewing a slide using the microscope's lowest magnification. This reduces the risk of contact by the microscope's objective lens.
What is the correct way of carrying?
Bend your hips and knees to squat down to your load, keep it close to your body, and straighten your legs to lift. Never lift a heavy object above shoulder level. Avoid turning or twisting your body while lifting or holding a heavy object.
What is the proper way to carry a microscope quizlet?
WHEN TRANSPORTING THE MICROSCOPE, HOLD IT IN AN UPRIGHT POSITION WITH ONE HAND ON ITS ARM AND THE OTHER SUPPORTING ITS BASE. AVOID SWINGING THE INSTRUMENT DURING ITS TRANSPORT AND JARRING THE INSTRUMENT WHEN SETTING IT DOWN. THE MICROSCOPE LENS MAY BE CLEANED (WITH ANY SOFT TISSUE).
How are slides held in place?
Slides are held in place on the microscope's stage by slide clips, slide clamps or a cross-table which is used to achieve precise, remote movement of the slide upon the microscope's stage (such as in an automated/computer operated system, or where touching the slide with fingers is inappropriate either due to the risk …
What is the correct way of carrying a microscope a hold the arm in one hand and the base on the other hand?
To carry the microscope grasp the microscopes arm with one hand. Place your other hand under the base. 2. Place the microscope on a table with the arm toward you.
What two parts do you place your hands while carrying a microscope?
- When you move your microscope, you should always use two hands. Place one hand around the arm, lift the scope, then put your other hand under the base of the scope for support. …
- When you put the scope down, do so gently. …
- Always have clean hands when handling your scope.
Which of the following describes the safest way to carry a microscope?
The proper way to carry a microscope is to grasp the arm of the microscope with your dominant hand, lift the microscope up slowly, and use your other hand to firmly hold the base to stabilize the microscope as you transport it from one place to another.
What is the first step to use on a microscope?
Steps on How to Use a Light Microscope
- Step 1: Connect the light microscope to a power source. …
- Step 2: Turn the revolving nosepiece so the lowest objective lens is in position.
- Step 3: Mount your specimen onto the stage. …
- Step 4: Use the metal clips to keep your slide in place.
What is a microscope arm?
Arm: The part of the microscope that connects the eyepiece tube to the base. Articulated Arm: Part of a boom microscope stand, an articulated arm has one or more joints to enable a greater variety of movement of the microscope head and, as a result, more versatile range of viewing options.
What is slide holder in microscope?
Slide holder – the mechanical device that is used for holding the slide in place so that it can be moved with ease from side to side back and forth. Stage opening – part of the mechanical stage that allows light to pass through the specimen for a better view.
What holds the slide in place?
Stage clips Stage clips hold the slides in place. Revolving Nosepiece or Turret: This is the part that holds two or more objective lenses and can be rotated to easily change power.
When lifting or moving the microscope which part will you use?
The microscope arm connects the eyepiece tube to the base. This is the part you should hold when transporting a microscope.
What are 4 precautions one should take when handling a microscope?
Microscope Safety
- Clean the microscope after each use. …
- Handle glass slides carefully. …
- Turn off the light source when the microscope is not in use. …
- Be aware if your microscope has a mercury lamp. …
- When carrying the microscope, always use two hands with one hand supporting the base and theother hand holding the arm.
Which two parts are used to hold the microscope?
The three basic, structural components of a compound microscope are the head, base and arm. Arm connects to the base and supports the microscope head. It is also used to carry the microscope.
Which part of the microscope holds and supports the specimen?
Stage: The flat platform that supports the slides. Stage clips hold the slides in place. If your microscope has a mechanical stage, the slide is controlled by turning two knobs instead of having to move it manually. One knob moves the slide left and right, the other moves it forward and backward.
Where do you place your hands when carrying a microscope?
When you move your microscope, you should always use two hands. Place one hand around the arm, lift the scope, then put your other hand under the base of the scope for support.
How do you handle a microscope and its safety?
Microscope Safety
- Clean the microscope after each use. …
- Handle glass slides carefully. …
- Turn off the light source when the microscope is not in use. …
- Be aware if your microscope has a mercury lamp. …
- When carrying the microscope, always use two hands with one hand supporting the base and theother hand holding the arm.
What are the do’s and don’ts when caring the microscope?
Don't touch the lenses of the microscope with your fingers. Keep slides and cover slips clean. Use anything OTHER than lens paper to clean them. NEVER aim the Lumarod or microscope at the sun or look directly into the sun.
What is used to hold a slide in place on the stage?
Spring loaded metal clips on the microscope stage are used to hold the slide in place.
What is the safest way to carry a microscope quizlet?
WHEN TRANSPORTING THE MICROSCOPE, HOLD IT IN AN UPRIGHT POSITION WITH ONE HAND ON ITS ARM AND THE OTHER SUPPORTING ITS BASE. AVOID SWINGING THE INSTRUMENT DURING ITS TRANSPORT AND JARRING THE INSTRUMENT WHEN SETTING IT DOWN. THE MICROSCOPE LENS MAY BE CLEANED (WITH ANY SOFT TISSUE).
Why should you never touch microscope lenses with your fingers?
Never touch the lenses with your fingers. Your body produces an oil that smudges the glass. This oil can even etch the glass if left on too long. Use only LENS PAPER to clean the glass.
What are the do’s and don’t in handling a microscope?
Don't touch the lenses of the microscope with your fingers. Keep slides and cover slips clean. Use anything OTHER than lens paper to clean them. NEVER aim the Lumarod or microscope at the sun or look directly into the sun.
What is the proper handling and caring of the microscope?
Always use two hands when moving the microscope. Make sure the microscope is not plugged in before moving it. If using immersion oil, be sure to clean the immersion oil lens thoroughly after use. Keeping your microscope clean (especially the optics) will also ensure that it lasts longer.
What are the simple precautions to follow while handling microscope?
Microscope Safety
- Clean the microscope after each use. …
- Handle glass slides carefully. …
- Turn off the light source when the microscope is not in use. …
- Be aware if your microscope has a mercury lamp. …
- When carrying the microscope, always use two hands with one hand supporting the base and theother hand holding the arm.
How do you use a microscope for beginners?
0:594:23BIOLOGY 10 – Basic Microscope Setup and Use – YouTubeYouTube
What is the first thing to do when using a microscope?
Steps on How to Use a Light Microscope
- Step 1: Connect the light microscope to a power source. …
- Step 2: Turn the revolving nosepiece so the lowest objective lens is in position.
- Step 3: Mount your specimen onto the stage. …
- Step 4: Use the metal clips to keep your slide in place.
Which part of the microscope should you hold when lifting or moving the microscope?
The microscope arm connects the eyepiece tube to the base. This is the part you should hold when transporting a microscope.
What are the five steps to using a microscope?
Steps on How to Use a Light Microscope
- Step 1: Connect the light microscope to a power source. …
- Step 2: Turn the revolving nosepiece so the lowest objective lens is in position.
- Step 3: Mount your specimen onto the stage. …
- Step 4: Use the metal clips to keep your slide in place.