What is the correct way to hold a microscope?
Always grip the microscope by the arm and put your hand beneath its base. Hold the scope upright at all times. Do not bump it against anything.
How should I properly hold and move the microscope?
When moving the microscope, always carry it with both hands (Figure 1). Grasp the arm with one hand and place the other hand under the base for support. 2. Turn the revolving nosepiece so that the lowest power objective l ens is “clicked” into position.
How do you hold a microscope slide?
Slides should be held by the edges, avoiding the cover glass area. Always begin viewing a slide using the microscope's lowest magnification. This reduces the risk of contact by the microscope's objective lens.
What is the correct way of carrying?
Bend your hips and knees to squat down to your load, keep it close to your body, and straighten your legs to lift. Never lift a heavy object above shoulder level. Avoid turning or twisting your body while lifting or holding a heavy object.
What is the proper way to carry a microscope quizlet?
WHEN TRANSPORTING THE MICROSCOPE, HOLD IT IN AN UPRIGHT POSITION WITH ONE HAND ON ITS ARM AND THE OTHER SUPPORTING ITS BASE. AVOID SWINGING THE INSTRUMENT DURING ITS TRANSPORT AND JARRING THE INSTRUMENT WHEN SETTING IT DOWN. THE MICROSCOPE LENS MAY BE CLEANED (WITH ANY SOFT TISSUE).
What holds the slide in place?
Stage clips Stage clips hold the slides in place. Revolving Nosepiece or Turret: This is the part that holds two or more objective lenses and can be rotated to easily change power.
What two parts do you place your hands while carrying a microscope?
- When you move your microscope, you should always use two hands. Place one hand around the arm, lift the scope, then put your other hand under the base of the scope for support. …
- When you put the scope down, do so gently. …
- Always have clean hands when handling your scope.
What is the correct way of carrying a microscope a hold the arm in one hand and the base on the other hand?
To carry the microscope grasp the microscopes arm with one hand. Place your other hand under the base. 2. Place the microscope on a table with the arm toward you.
Which of the following describes the safest way to carry a microscope?
The proper way to carry a microscope is to grasp the arm of the microscope with your dominant hand, lift the microscope up slowly, and use your other hand to firmly hold the base to stabilize the microscope as you transport it from one place to another.
How many hands should you use to carry a microscope?
When you move your microscope, you should always use two hands. Place one hand around the arm, lift the scope, then put your other hand under the base of the scope for support.
Which two parts are used to hold the microscope?
The three basic, structural components of a compound microscope are the head, base and arm. Arm connects to the base and supports the microscope head. It is also used to carry the microscope.
When lifting or moving the microscope which part will you use?
The microscope arm connects the eyepiece tube to the base. This is the part you should hold when transporting a microscope.
What are 4 precautions one should take when handling a microscope?
Microscope Safety
- Clean the microscope after each use. …
- Handle glass slides carefully. …
- Turn off the light source when the microscope is not in use. …
- Be aware if your microscope has a mercury lamp. …
- When carrying the microscope, always use two hands with one hand supporting the base and theother hand holding the arm.
What are the 3 don’ts in handling a microscope?
NOTES:
- Do not touch the glass part of the lenses with your fingers. Use only special lens paper to clean the lenses.
- Always keep your microscope covered when not in use.
- Always carry a microscope with both hands. Grasp the arm with one hand and place the other hand under the base for support.
What is used to hold a slide in place on the stage?
Spring loaded metal clips on the microscope stage are used to hold the slide in place.
Where do you place your hands when carrying a microscope?
When you move your microscope, you should always use two hands. Place one hand around the arm, lift the scope, then put your other hand under the base of the scope for support.
What are the do’s and don’ts when caring the microscope?
Don't touch the lenses of the microscope with your fingers. Keep slides and cover slips clean. Use anything OTHER than lens paper to clean them. NEVER aim the Lumarod or microscope at the sun or look directly into the sun.
Why should you never touch microscope lenses with your fingers?
Never touch the lenses with your fingers. Your body produces an oil that smudges the glass. This oil can even etch the glass if left on too long. Use only LENS PAPER to clean the glass.
Which part is used when you hold and carry the microscope?
arm To carry the microscope, grasp the microscope's arm with one hand. Place your other hand under the base. 2. Place the microscope on a table with the arm toward you.
Why is it important to carry the microscope with two hands?
Carry with Two Hands To prevent damage to the microscope and to protect yourself from injury, always carry the microscope with two hands. Place one hand on the arm of the microscope and place the other hand underneath the base of the microscope. This method will give the microscope the most support.
What are the things you need to remember in handling the microscope?
10 Tips for Microscope Care
- Tip 1: Handle with care. …
- Tip 2: Keep lenses clear of slides. …
- Tip3: Clean after using immersion oil. …
- Tip 4: Cover when not in use. …
- Tip 5: Look after the bulb. …
- Tip 6: Store in a clean, dry place. …
- Tip 7: Only use special lens paper or wipes for cleaning the lenses.