What should you do before starting an inboard gasoline engine on a boat?
If you have an inboard gasoline engine, you need to turn on the blower for four full minutes before starting your boat. This very important step is to remove any fumes that could be lingering in the bilge. All portable fuel tanks must be filled off of the boat.
When should blower be operated on gasoline powered boats?
It is recommended to always use the blower before turning on the engine after refueling to clear out any gasoline fumes that may linger.
What is the purpose of a blower on a boat?
In gas-powered boats, there should be one blower for each engine. The blower's primary job is to remove any gasoline vapors in the engine room. These vapors are highly explosive and if ignited by a spark can destroy the boat and anyone on or beside the boat.
What should you do before starting an inboard gasoline engine quizlet?
Before starting an inboard gasoline engine, you should operate the blower for at least 4 minutes and: sniff the blower exhaust for traces of gasoline fumes.
How do you start an inboard boat engine?
0:503:02Starting an Inboard Outboard Motor – The right way to start a boat!YouTube
How do you start an inboard boat engine out of water?
0:211:19How to run inboard engine out of the water on a hose – YouTubeYouTube
What does blower do on inboard motor?
0:492:22What is & and Why do you need a Blower Motor in a Boat. – YouTubeYouTube
What is an important step in the fueling process of a boat quizlet?
This very important step is to remove any fumes that could be lingering in the bilge. -All portable fuel tanks must be filled off of the boat. Once filled, store portable fuel tanks onboard in a well-ventilated area away from the engine and electrical equipment. You just studied 3 terms!
What is an important step in the fueling process of a boat?
Turn off anything that might cause a spark—engines, fans, or electrical equipment. Shut off all fuel valves and extinguish all open flames, such as galley stoves and pilot lights. Close all windows, ports, doors, and other openings to prevent fumes from entering the boat.
How do you start an old inboard boat?
0:432:19How To Start a Gas Boat – YouTubeYouTube
Can you start an inboard boat motor without water?
To run your boat motor out of water, start by attaching a hose to your motor's water intake so you can flush in water, which will avoid damaging the engine. Once the hose is attached, turn on the water faucet. Then, pull the gear shift to neutral and start the engine.
Which of the following is an important safety precaution when fueling your vessel quizlet?
What is a good safety precaution when fueling your boat? Sniff for fumes after fueling and before starting the engine. Run the ventilation system for at least four minutes before fueling. Keep all windows and doors open during fueling.
Why must you operate the exhaust blower before starting a boat’s inboard gasoline engine quizlet?
Before starting an inboard gasoline engine, you should operate the blower for at least 4 minutes and: sniff the blower exhaust for traces of gasoline fumes. Compared to a car, a boat going ahead steers: in a different fashion because it pivots about a point near the bow.
How do you start a gas boat?
0:432:19How To Start a Gas Boat – YouTubeYouTube
How do you start an inboard boat out of water?
0:211:19How to run inboard engine out of the water on a hose – YouTubeYouTube
What should you do before fueling your boat?
Shut off all fuel valves and extinguish all open flames, such as galley stoves and pilot lights. Close all windows, ports, doors, and other openings to prevent fumes from entering the boat. Remove portable fuel tanks from the boat and fill them on the dock. Make sure that your fire extinguisher is within reach.
Which of the following is recommended maintenance for an inboard boat quizlet?
Which of the following is recommended maintenance for an inboard boat? The answer to this question is the option that states “deteriorated engine and hull zincs should be replaced if corroded”.
What is the heat escape lessening position help designed to prevent quizlet?
What is the Heat Escape Lessening Position (H.E.L.P.) designed to prevent? The loss of body heat when in the water.
How do you start an inboard boat?
0:503:02Starting an Inboard Outboard Motor – The right way to start a boat!YouTube
How does an inboard boat engine work?
Generally speaking, inboard engines are four-stroke engines (much like car engines) that power a drive shaft running through the bottom of the hull. The drive shaft is connected to a propeller that spins to propel the boat. The faster the propeller spins, the more the boat will accelerate.
What is an important step in the boat fueling process?
Proper Fueling Procedures
- Secure boat to the dock.
- Switch off engine.
- Extinguish all open flames.
- Do not use electrical switches.
- No smoking.
- Ports, hatches, and doors closed.
- Make certain all passengers are ashore.
- Determine quantity of fuel required and make sure it is the proper type of fuel.
What should you do before fueling your boat quizlet?
What should you do before fueling your boat? Turn off the engine and close all windows, ports, doors, and other openings.
What is the purpose of an inboard engine ventilation system?
The ventilation system removes fuel vapors from the bilge by circulating air through the engine and fuel tank compartments.
Which of the following is recommended maintenance for an inboard boat answers?
Which of the following is recommended maintenance for an inboard boat? The answer to this question is the option that states “deteriorated engine and hull zincs should be replaced if corroded”.
What is the heat escape lessening position help designed to prevent?
Heat Escape Lessening Posture (HELP): When you are alone, this position protects the body's three major areas of heat loss (groin, head/neck, and rib cage/armpits). Wearing a PFD allows you to draw your knees to your chest and your arms to your sides.
How do you start a boat engine?
How to Start an Outboard Motor
- Open the ventilation cap on the fuel tank.
- Tilt the motor into the water.
- Engage the kill switch on manual ignition motors.
- Squeeze the primer bulb.
- Put the gear shift lever in the neutral position.
- Turn on the choke.
- Start the ignition.
- Turn off the choke.
What are ventilation systems on boats used for quizlet?
What is the purpose of a boat's ventilation system? To circulate air through engine and fuel tank compartments.
What is a boat ventilation system?
The ventilation system removes fuel vapors from the bilge by circulating air through the engine and fuel tank compartments.
Which of the following is recommended maintenance for a gasoline powered boat?
Changing engine oil, and checking fluid levels are the best way to keep your boat running smoothly. Even well maintained engines will show signs of age. Leaks from steering cables, drips from the last oil change, or fuel from leaky fittings can all find their way into the bilge.
Which of the following actions is the best to take when fueling an outboard boat with portable tank?
Fueling portable containers
- Always refill your portable fuel containers on the pavement or dock to ensure a good ground. …
- On the dock, put an absorbent pad under the container.
- Consider using a funnel. …
- Ensure the nozzle stays in contact with the tank opening.