What should you require from others who operate your vessel?
Check that they meet the minimum age and boater education requirements for operation in your state. Make sure they know basic boating safety and navigation rules. Show them how to use the lanyard with the ECOS and require them to use it.
What should you do if you encounter a fishing boat while out in your vessel quizlet?
Always remain seated while shooting. What should you do if you encounter a fishing boat while out in your vessel? Avoid making a large wake.
What is good for cleaning your vessel and does not harm lakes and rivers?
Use alternative cleaning products such as baking soda, vinegar, lemon juice, and borax – and don't forget about the power of “elbow grease”. If you use detergents, use phosphate-free, bio-degradable, and non-toxic cleaners sparingly to minimize the amount discharged into the water.
What is the important safety information found on a boats capacity plate?
Look for a capacity plate near the operator's position or on the transom of the boat. This plate indicates the maximum weight capacity and/or the maximum number of people that the boat can carry safely in good weather. You should not exceed either the stated maximum weight capacity or the maximum number of people.
What should boaters do when operating a vessel on different waterways?
Your primary responsibility is to keep a sharp lookout and avoid a collision.
- Always be sure other boaters are aware of your presence. …
- Be considerate of other vessels. …
- Paddle as close to shore as is safe, and avoid channels used by larger craft. …
- Operate according to homeland security measures.
What is the first action required of a boat operator who is involved in a boating accident?
If you are involved in a boating accident, you must immediately: Stop your vessel at the scene of the accident. Assist anyone who may be injured or may be in danger. Make sure everyone is wearing a lifejacket or PFD.
What should you do if your boat gets swamped far from shore?
Your boat gets swamped far from shore. What should you do? Stay with the boat, and signal for help.
When operating a boat when should you have your appointed lookouts in place?
When operating a boat, when should you have your appointed lookouts in place?
- Only when visibility is a concern.
- Before you start the motor.
- Before all passengers board the boat.
- Once you have left the dock.
What can you do to prevent erosion while operating a powerboat near shoreline?
Reduce throttle to “no wake” speed when close to a shoreline or in small rivers to help prevent erosion. Don't operate in shallow water where your prop or pump intake can stir up bottom sediments and destroy aquatic plants. Drain the bilge and clean the prop before leaving a waterway.
What is the important safety information found on a boats capacity plate quizlet?
What important safety information is found on a boat's capacity plate? Maximum weight and/or number of people the boat can carry safety.
When onboard and facing the front of a boat where is the stern?
You have learned that the front of the boat is the bow, and the back of the boat is the stern. The direction toward the bow is forward. Beyond the bow, you would see something ahead. Toward the stern is aft.
What is the first action required of a boat operator who is involved in a boating accident quizlet?
What is the first action required of a boat operator who witnesses a boating accident? To provide assistance.
What is the first thing you should do in a boating accident?
If you experience a boating accident and the boat remains safely afloat, the first thing you should do is to ascertain whether you or anyone else involved in the incident requires medical attention. If anyone fell overboard, you and the others onboard should work quickly to get them back into the vessel safely.
How do you anchor near shore?
3:4812:11How To Anchor at the Sandbar *or beach* by Boat – YouTubeYouTube
What would you do if you were in the middle of a lake and your boat springs a leak?
If it's a serious leak, you may need to take immediate emergency action. One way is to simply remove water from the boat with a bucket and follow it to its source as the water levels die down. But if this isn't feasible, it's better to return to shore and lift the boat out of water for closer examination.
Which of the following actions is required of Powerboat a when approaching the starboard side of sailboat B in darkness or reduced visibility?
Give way to your starboard side. Powerboat A: When only red and green lights are visible, you are approaching a sailboat head-on. Give way to your starboard side. Powerboat B: When white, red and green lights are visible, you are approaching a powerboat head-on.
How can you protect your shoreline from erosion?
Slow erosion by diverting water runoff away from hills and bluffs. Use drain pipes or French drains to create a safe route for water that can't be diverted. Leave natural shoreland vegetation and beach rocks undisturbed. The shore edge can be further protected by installing rip-rap (big rocks).
How can we protect your shoreline?
Some Basic Principles of Shoreline Protection
- Imitate nature. The native vegetation usually found at the shoreline strengthens its structural integrity and prevents the land from breaking apart. …
- Keep slopes gentle. …
- Employ "soft armoring" whenever possible. …
- Mix it up. …
- Keep it small and simple.
What information is usually found on the capacity plate of a powerboat quizlet?
What information is displayed on the capacity plate of an outboard powerboat? the maximum weight and number of people that the boat can carry and horsepower rating.
When onboard and facing the bow of the boat where is the port side?
When looking towards the bow, the left-hand side of the boat is the port side. And starboard is the corresponding word for the right side of a boat.
What is aft and stern?
The difference between "aft" and "stern" is that aft is the inside (on board) rearmost part of the vessel, while stern refers to the outside (offboard) rearmost part of the vessel. The stern is opposite the bow, the outside (offboard) of the front of the boat.
What is the first action required of a boat or operator who is involved in a boating accident?
An operator involved in a boating accident must: Stop his or her vessel immediately at the scene of the accident and… Assist anyone injured or in danger from the accident, unless doing so would seriously endanger his or her own vessel or passengers and…
What is the first action that the boat operator should take immediately following a collision?
If you are involved in a collision and you are still in the pleasure craft: Stop the engine. Make sure everyone is wearing a lifejacket or PFD. Check to see if anyone is injured.
How do you anchor a boat on Lake shore?
Route your anchor line on the outside of the boat, bow to stern, to avoid catching the rode on anything. Power into deeper water and turn the boat toward shore. Considering that your boat will end up closer to shore in about waist-deep water, plan your scope so that your anchor will set well.
How do you pull a boat to the beach?
1:443:56Beaching Your Boat So You Can Leave Again | BoatUS – YouTubeYouTube
What do you do if your boat is on water?
Step 2) If the craft is moving bring it to a complete stop (this will reduce water pressure against the hull and reduce the speed at which water is entering the boat). Turn on the bilge pump (if equipped) and identify the source of the leak or flooding. Step 3) Stop the hull leak if possible.
What should the operator of a powerboat A do when being approached by powerboat B?
If a power-driven boat (B) is approaching from your port (left) sector, you are the stand-on craft (A) and have the right-of-way. You should maintain your speed and direction and be ready to take evasive action.
When a sailboat is approaching a powerboat which one is the give way vessel?
Meeting Head-On: The power-driven vessel is the give-way vessel. The sailing vessel is the stand-on vessel. Paths That Cross: The power-driven vessel is the give-way vessel.
How do you protect a shoreline?
Some Basic Principles of Shoreline Protection
- Imitate nature. The native vegetation usually found at the shoreline strengthens its structural integrity and prevents the land from breaking apart. …
- Keep slopes gentle. …
- Employ "soft armoring" whenever possible. …
- Mix it up. …
- Keep it small and simple.
How do you shore up a shoreline?
7 Shoreline Erosion Control Methods
- Bulkhead Rock and Seawalls. Many property owners install seawalls or bulkhead rock intending to stop shoreline erosion. …
- Water Runoff Diversion. Increased water runoff is especially damaging to high bluffs. …
- Rip Rap Rocks. …
- Vegetation. …
- Coir Logs. …
- Contour Wattling. …
- Permanent Erosion Blankets.