Which of the following is a guideline for safe ambulance driving?
General guidelines for safe ambulance driving include all of the following, EXCEPT: regularly using the siren as much as possible. When transporting a patient who is secured to a backboard, it is important to: place deceleration straps over the patient's shoulders.
When approaching a helicopter What should you do?
If you are approaching the helicopter on level ground, walk toward the aircraft in a low crouch to allow for extra space between your body and the rotors. Be sure that all personal belongings, such as hats, are secure. Don't hold anything above eye level because it can be blown away.
When approaching a helicopter whether the rotor blades are moving or not you should?
When approaching a helicopter, whether the rotor blades are moving or not, you should: never duck under the body or the tail boom because the pilot cannot see you in these areas.
What is the purpose of a jump kit?
The primary purpose of a "jump kit" is to: ensure that you have immediate access to the AED. have available all of the equipment that you will use in the entire call.
When hot loading a helicopter you should?
However, "hot" loading is safe if the following 9 general guidelines are followed.
- Be sure to secure all loose personal objects. …
- Always wear protective eyewear. …
- Keep all fire and EMS apparatus and personnel at least 100 feet from the landing zone. …
- Do NOT enter the landing zone.
When can you drive an ambulance on a multilane highway?
When driving an ambulance on a multilane highway in emergency mode, you should: remain in the extreme left-hand lane. Your unit and a fire department vehicle are responding to the scene of a patient in cardiac arrest.
What is a general safety rule when working around helicopters?
Always wear your personal protective equipment (PPE) when working near an operating helicopter (eye, hearing, head, etc.). Always get the approval of a flight crew member or the pilot before approaching an operating helicopter. Only approach and depart a helicopter as directed. Use a slightly crouched position.
At what angle should you approach a helicopter?
A shallow approach is considered a glide slope of 5 deg., “generally, for almost any helicopter.” A normal approach is 10 deg. and a steep one is 15 deg. or more. The difficulty and sensitivity to errors each increases with the angle. There are several common problems or common mistakes in approaches, he said.
When approaching a helicopter with its main rotor turning you should?
When approaching a helicopter with its rotors turning, it is important to remember that the: main rotor may be only 4' (1.2 m) above the ground. Upon arriving at the scene of a motorcycle crash, you park your vehicle in a safe location and don a reflective safety vest.
Which of the following statements regarding approaching a helicopter is correct?
Which of the following statements regarding approaching a helicopter is correct? Approach the helicopter only after the pilot signals that it is safe to do so. Which of the following is an advantage of using a helicopter during an emergency? They can respond quickly above traffic congestion.
What should be in a jump kit?
A jump kit is supposed to be relatively light and portable….
- The weather radio. …
- The extra leash. …
- The water, Tupperware containers and Puppyface food. …
- Accordion folder with paperwork. …
- Paper and pen.
What’s in a jump kit EMS?
Equipment might include:
- PPE (gloves, mask, eye protection)
- Small pocket mask, NPA, OPA.
- Trauma scissors.
- 1 or 2 tourniquets (SWAT-T, CAT)
- Chest decompression kit.
- 2-3 trauma dressings (Israeli type)
- 4-6 hemostatic dressings.
- 2-3 open chest seal (Bolin, Hyfin, Asherman)
What is hot loading a helicopter?
In the most critical situations, emergency crews on the ground and Life Flight crew members may determine that they will do a "hot load," meaning the patient will be loaded into the helicopter while the engines are still running.
Do you have to move out of the way for emergency vehicles?
The best thing to do, if you can and the space allows, is to move yourself to the side of the road and come to a controlled stop. This should be done without putting any other road users or pedestrians at risk or committing any motoring offences.
How many car lengths is 4 seconds?
Remember: The space between your vehicle and a large vehicle behind you on a highway should be four seconds at speeds of 46-70 mph, plus one second for every 10 feet of vehicle length.
How many feet from a helicopters lifting area must loose gear be removed?
100 feet Every practical precaution shall be taken to provide for the protection of the employees from flying objects in the rotor downwash. All loose gear within 100 feet of the place of lifting the load, depositing the load, and all other areas susceptible to rotor downwash shall be secured or removed.
What angle does a helicopter land and take off at?
The approach is used into a landing spot that is in the open and has very minimal obstacles around it. The pilot will set up the approach with roughly a 20°- 30° descent angle and what appears to be a walking pace over the ground when at height.
When approaching a helicopter with its main rotor turning you should quizlet?
allow you to request the right of way. When approaching a helicopter with its rotors turning, it is important to remember that the: main rotor may be only 4' (1.2 m) above the ground. Upon arriving at the scene of a motorcycle crash, you park your vehicle in a safe location and don a reflective safety vest.
Which of the following statements regarding approaching a helicopter is correct quizlet?
Which of the following statements regarding approaching a helicopter is correct? Approach the helicopter only after the pilot signals that it is safe to do so. Which of the following is an advantage of using a helicopter during an emergency? They can respond quickly above traffic congestion.
When a helicopter must land on a grade?
When a helicopter must land on a grade (uneven ground), you should: approach the aircraft from the downhill side. In general, medivac helicopters should be utilized when: a patient has a time-dependent injury or illness and traffic conditions would cause a significant delay in definitive care.
What is a jump kit EMT?
A jump bag, also known as a trauma bag or EMT bag is exactly what it sounds like. It is a bag or pouch that contains equipment that is used to treat traumatic injuries.
What should be in a first responder kit?
As well as insta-glucose, large burn dressing and and eye and face shield for protection. Kit also includes standard first aid items including CPR face shields, instant cold packs, dressings, bandages, eyewash bottles, bio-hazard bags, gloves and more.
When hot loading a helicopter you should approach?
Approaching the Helicopter Personnel involved in loading activities should never approach the helicopter without being escorted by a member of the flight crew. They must remain approximately 50 feet from the aircraft and wait for the flight crew to approach them.
Can you jump a red light for an ambulance?
The ambulance crew are trained to negotiate traffic and may look to use the bus lane to pass, and you could get in their way or even get a ticket. Do not go through a red light to try to get out of the way as you may commit an offence. If it is safe to pass the ambulance will do so.
Do you legally have to give way to ambulances?
The Highway Code states you should give way to vehicles with flashing lights – including ambulances, police cars, fire engines and emergency doctors.
How many feet is a safe following distance?
The rule of seconds advises that if you're driving below 40 mph, you should maintain at least one second of distance for each 10 feet of vehicle length. Over 40 mph, add an extra second. For a truck driver cruising in a longer, heavier vehicle, more space and time is needed.
How many car lengths is safe?
Rule #1: Do Not Tailgate "Here's the deal. Figure one car length for every ten miles an hour," Barndt said. "So if you're doing 55 miles an hour you should have six car lengths between you so that if something happens to the car in front of you, you have time to stop or react."
How far away must workers be from rotors while the helicopter is in motion?
Approach distance. No unauthorized person shall be allowed to approach within 50 feet of the helicopter when the rotor blades are turning. Approaching helicopter. Whenever approaching or leaving a helicopter with blades rotating, all employees shall remain in full view of the pilot and keep in a crouched position.
Where does helicopter take off?
Generally, helicopters do not need a runway to take off and can do it directly from airports helipads, aprons or FATO (Final Approach and Take Off area). Usually helicopters depart from parking positions to FATO or TLOF (Touchdown and Lift Off area); it is from these positions that they take off.
How do you land a helicopter?
3:5113:55How to land a helicopter – YouTubeYouTube